Full Hydraulic Truck-mounted drilling rig
Home › Off-shore Equipment › CDR50 Off-shore Drilling Rig

CDR50 Off-shore Drilling Rig
- The electric drive offshore drilling rig is driven in groups, draw works, rotary table, mud pump and top drive are driven by motors alone, and the electric control system is divided into dc electric control and ac electric control.
- The offshore workover rig has diesel engine, dc, ac, hydraulic and compound driving modes.
- Modular structure is adopted for the base, which is divided into drill floor and lower base.
- The drawworks adopts a single drum structure, the main brake is a hydraulic disc brake (single or double disc), and the auxiliary brake is a push-disc (water-cooled) or clamp-disc (air-cooled) pneumatic brake.
- The mast adopts tower derrick or two-section set mast derrick, hydraulic cylinder lifting and stretching, the derrick body structure is treated with hot dip zinc or hot spray aluminum, and the outer surface is coated with Marine anti-corrosion paint.
Listed specifications
| Model | CDR50DB |
| Max Hook Load (kN) | 3150 |
| Nominal Drilling Depth (114mm)m | 3500~5000 |
| Drawworks Power (kW) | 1100 |
| Lines | 10 |
| Wireline dia.(mm) | 35 |
| Mast height (m) | 45, 46, 47 |
| Max hook speed (m/s) | 1.5 |
| substructure height (m) | 7.5, 9 |
| RT hole dia.(m) | 952.5 |
| Main brake | disc brake |
| auxiliary brake | dynamic braking |
| *Mud pump power (hp)×qty | 1600×2 |
| *engine power (kW)×qty | 1200×3 |
Specifications are as listed for this item; confirm every detail in your quotation.
Request a quote
No prices are shown. Tell us what you need for CDR50 Off-shore Drilling Rig and we will reply to the contact details you give.



