Home › On-shore Workover Rig › Large Load Workover Rig › Large Load Workover Rig -225

Large Load Workover Rig -225
- The main brake adopts belt brake or hydraulic disc brake, and the auxiliary brake adopts pneumatic push-disc brake, pneumatic clamp disc brake or water brake.
- The mast set with two sections at the front opening, tilting forward or standing upright, lifting and stretching of the hydraulic cylinder, and is equipped with wind tight rope and anti-overturn tight rope.
- The drilling floor adopts the telescopic or spiral lifting structure, the floating platforms on both sides can be turned over, and the sledding can be hoisted and transported.
- Table height, size, layout can be customized.
- Optional light work table as required.
- Drilling floor, rotary table and transmission system can be selected as required or customized.
Listed specifications
| Model | CDR2250Z |
| Max hook load (kN) | 2250 |
| Rated hook load (kN) | 1800 |
| Nominal Workover depth (73 mm) m | 9000 |
| Engine Power (kW) | 470×2 |
| Lines | 10 |
| Wireline dia (mm) | 32 |
| Mast Height (m) | 36, 38 |
| Max hood speed (m/s) | 1.5 |
| Substructure height (m) | 6, 7, 7.5 |
| RT hole dia. (mm) | 698.5 |
| Main brake | disc brake |
| auxiliary brake | 236WCB, dynamic braking |
| carrier model | CDR70/14×8 |
| Min ground clearance (mm) | 311 |
| Min diameter of turning circle (m) | 41 |
| emission standard | 国V |
Specifications are as listed for this item; confirm every detail in your quotation.
Request a quote
No prices are shown. Tell us what you need for Large Load Workover Rig -225 and we will reply to the contact details you give.



